Batribike GRANITE User Manual download pdf (Page 10)

Centre Stand (where fitted)

To put the bicycle on its stand:-

1) While holding the bicycle upright, place your foot behind the

stand.

2) Pull the bicycle backwards until the stand is in place.

Make sure bicycle is on solid ground.

Side Stand (where fitted)

To put the bicycle on its stand:-

1) While holding the bicycle upright, push the stand to its full

extent.

2) Lean the bicycle over onto the stand.

Make sure bicycle is on solid ground.

Tyre Pressures

The tyres should be pumped up to within the range stated on the sidewall.

This should be regularly checked as running with the correct pressures

will ensure maximum range from the battery.

Quick Release fittings for Seat Height Adjustment

With the locking lever in the loose position, tighten the nut until finger tight.

The final tightening is done by moving the lever to the locked position. To

undo move the lever to the loose position to enable height adjustment.

Loose Locked

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Batribike GRANITE User Manual Page 10